Difference between revisions of "Repair Station"
(use lore template) |
Sick Willie (talk | contribs) (Added Biomatter's fantastic research from Cogmind subreddit) |
||
| Line 8: | Line 8: | ||
Higher security repair stations are required to repair more complex parts and prototypes. | Higher security repair stations are required to repair more complex parts and prototypes. | ||
| − | + | == Manual Commands (Indirect Hacking) == | |
| − | + | While accessing a repair station, pressing 'z' will allow you to enter the following manual prompts. | |
| + | Refit | ||
| + | If you have below X number of slots filled, fills those slots with backup cores, hover pads, and lasers. | ||
| + | Repair | ||
| + | Repairs a scanned part. Takes time to complete. If this step fails, your part might be damaged beyond use. | ||
| + | Scan(PARTNAME) | ||
| + | Scans a part from your inventory into the machine so it can be repaired. | ||
[[Category:Machines]] | [[Category:Machines]] | ||
Revision as of 10:44, 5 June 2015
Self-contained repair facility capable of restoring the integrity of damaged components. Components that utilize more advanced technology require a correspondingly advanced repair station to restore. Serious internal issues such as prototype malfunction and component deterioration are beyond the scope of repair.
Repairing parts is a two-stage process. First instruct the station to scan a component currently in your inventory. Then initiate the repair process, which both fixes broken parts and restores them to full integrity.
The separate "refit" command scans a robot and attempts to restore missing functionality using simple backup parts.
Higher security repair stations are required to repair more complex parts and prototypes.
Manual Commands (Indirect Hacking)
While accessing a repair station, pressing 'z' will allow you to enter the following manual prompts.
Refit
If you have below X number of slots filled, fills those slots with backup cores, hover pads, and lasers.
Repair
Repairs a scanned part. Takes time to complete. If this step fails, your part might be damaged beyond use.
Scan(PARTNAME)
Scans a part from your inventory into the machine so it can be repaired.